Maximize the performance of your truck with the Airdog FP-100 fuel system! This 100 gallon per hour lift pump system is more than enough to provide a steady supply of fuel to your engine. Feel the boost in performance as you save in the long run thanks to the dependable build quality and limited lifetime warranty.
100 GPH Flow Rate
Removes Air And Vapor
Longer Injection Pump Lifespan
Improved Fuel Economy
Better Throttle Response
Smoother Idle And Acceleration
Eliminated Spray Pattern Disruption
Longer Injector Lifespan
Limited Lifetime Warranty
Having the Airdog FP-150 lift pump in your truck’s system will deliver several benefits in regards to power, fuel economy, and longevity. As the engine will have an optimal amount of fuel delivered to it regardless of the conditions, it will be able to output more power and torque for a noticeable difference.
Another inherent benefit of this change is lower fuel consumption and lower exhaust gas emissions. Not only that, but the throttle will become more responsive, and the engine will run more smoothly when idling. As you can see, the benefits of the Airdog FP-150 lift pump quickly add up to a system that is definitely worth installing.
Through careful engineering and designing, as well as the use of the finest materials, Airdog FP-150 manages to sustain its operating life for longer than any other system. The initial investment will pay for itself not only with the initial performance benefits but also over the years as you save on possible replacements.
All you need to do is swap out the Airdog FF100-2 fuel filter and WS100 water separator when necessary to keep your truck operating at its full potential. As only the purest fuel will arrive to be ignited, the fuel injectors will not accumulate dirt nearly as fast, which means they’ll last longer too!
Airdog without a doubt has one of the best warranty policies among the lift pump manufacturers. Register through their quick and easy process to receive a limited lifetime warranty. Never worry about your lift pump again with the Airdog FP-150 fuel system!
What AirDog pump do I need for my truck?
Original AirDog and AirDog II 100 units are recommended for up to 500 horsepower. Original AirDog 150 and AirDog II 165 units are recommended for horsepower up to 1000. AirDog ® II 200 units are recommended for anything that exceeds 1000 horsepower.
What kits will require dropping the tank or installing a suction tube?
All Original AirDog 150, AirDog II 200 Systems and AirDog II 165 Dodge Systems. Any truck that is equipped with an in tank fuel pump will require a suction tube or module upgrade kit
If I daily drive my stock truck will running an AirDog 150 or AirDog II 165 4G hurt anything?
No, it will not hurt anything. With the Original AirDog’s High Flow return all excessive fuel not being used by your truck will be returned to the tank. When running the AirDog II 4G the Demand flow only allows the pump to send what fuel is needed to the injection pump, and all other fuel is recirculated internally in the base returning it to the suction side of the pump.
What is the difference between the AirDog 100 and AirDog 150?
Physically there are no differences. The units are the exact same size. The AirDog 100 is a 2000 r.p.m. motor and has a flow rate of 100 gallons. The AirDog 150 uses a 3000 r.p.m. motor and has a flow rate of 150 gallons per hour. Also, depending on the application, the actual installation on the vehicle will differ as well. For Dodge trucks with an in-tank fuel pump, both the 100 and 150 systems will require you to drop the tank and install a suction tube.
Is the factory fuel return line from the engine needed since the lift pump has a built in return line? If the factory line is not needed, what is needed to correctly delete the factory return line?
The factory fuel return line is still required when installing an AIRDOG A4SPBC085 100GPH AIR/FUEL SEPARATION SYSTEM. The new Airdog fuel pump will require an additional (dedicated) fuel return line back to the fuel tank. This is all included within the Airdog fuel system kit.
Details regarding our return policy, warranty information and CORE charges can be found here